leads4pass 1Z0-821 exam dumps (already updated) are here for your study. leads4pass provides a real 1Z0-821 exam study guide, real Oracle certification 1Z0-821 exam study guide that helps you to study for the 1Z0-821 exam easily.
We provide the latest 1Z0-821 exam dumps (243 Q&A) https://www.leads4pass.com/1z0-821.html (PDF or VCE format) study guide for you to pass.
Latest 1Z0-821 Exam Study Guide 1Z0-821 Dumps 100% Free Exam Questions
Question 1:
Review the boot environments displayed on your system:
Which option describes the Solaris-1 BE?
A. It is active on the next reboot.
B. It is active now.
C. It is inactive.
D. It is unbootable.
E. It is active now and on reboot.
F. It has been removed and will no longer be available after the next reboot.
Correct Answer: E
In the below output, NR (now running) means the BE is active now and will be the active BE on reboot.
Example:
Display your existing BE information.
# beadm list
BE Active Mountpoint Space Policy Created
solaris NR / 12.24G static 2011-10-04 09:42
Question 2:
View the Exhibit and review the disk configuration.
The following command is executed on the disk:
zpool create pool1 c3t3d0s0
What is the result of executing this command?
A. A zpool create error is generated.
B. A 1-GB ZFS file system named /pool1 is created.
C. A 15.97-GB storage pool named pool1 is created.
D. The disk will contain an EFI disk label.
Correct Answer: B
Question 3:
View the Exhibit and review the zpool and ZFS configuration information from your system.
Identify the correct procedure for breaking the /prod_data mirror, removing c4t0d0 and c4t2d0, and making the data on c4t0d0 and c4t2d0 accessible under the dev_data mount point.
A. zpool split pool1 pool2 c4t0d0 c4t2d0zpool import pool2zfs set mount point = /dev_data pool2/ prod_data
B. zpool detach pool1 pool2zpool attach pool2zfs set mountpoint=/dev_data pool2/prod_data
C. zpool split pool1/prod_data -n pool2/dev_datazfs set mount point = /dev_data pool2/prod_data
D. zpool split pool1 pool2 c4t0d0 c4t2d0zpool import pool2
Correct Answer: D
In this Solaris release, you can use the zpool split command to split a mirrored storage pool, which
detaches a disk or disks in the original mirrored pool to create another identical pool.
After the split operation, import the new pool.
Question 4:
The storage pool configuration on your server is:
You back up the /pool1/data file system, creating a snapshot and copying that snapshot to tape (/dev/ rmt/0). You perform a full backup on Sunday night and Incremental backups on Monday through Saturday night at 11:00 pm. Each incremental backup will copy only the data that has been modified since the Sunday backup was started.
On Thursday, at 10:00 am, you had a disk failure. You replaced the disk drive (c4t0d0). You created pool (pool1) on that disk.
Which option would you select to restore the data in the /pool1/data file system?
A. zfs create pool1/data load the Monday tape and enter:zfs recv pool1/data < /dev/rmt/0Load the Wednesday tape and enter:zfs recv pool1/data < /dev/rmt/0
B. Load the Sunday tape and restore the Sunday snapshot:zfs recv pooll/data < /dev/rmt/0zfs rollback pool1/data@monLoad the Wednesday tape and restore the Wednesday snapshot:zfs recv pool/ data < /dev/mt/0zfs rollback pool1/data@wed
C. zfs create pool/data load the Wednesday tape and enter:zfs recv -F pool1/data < /dev/rmt/0
D. Load the Sunday tape and enter:zfs recv pool1/data < /dev/mt/0Load the Wednesday tape and enter:* commands missing*
Correct Answer: D
First, the full backup must be restored. This would be the Sunday backup. Then the last incremental backup
must be restored. This would be the Wednesday backup. Before restoring the Wednesday incremental file
system snapshot, the most recent snapshot must first be rolled back.
By exclusion D) would be the best answer even though it is incomplete.
Question 5:
To assist in examining and debugging running processes, Solaris 11 has a utility that returns pro arguments and the names and values of environment variables.
What is the name of this utility?
A. ppgsz
B. pargs
C. pmap D. pgrep
Correct Answer: B
The parts utility examines a target process or processes the core file and prints arguments, environment variables, and values, or the process auxiliary vector.
Question 6:
You are installing Oracle Solaris 11 on a SPARC-based system by using the Test Installer. Which three statements are true?
A. The ROOT user will always be configured as a role.
B. The root filesystem will always be deployed on ZFS.
C. The root filesystem will always be located on a local disk.
D. The network can be configured using DHCP.
E. The set of packages that will be installed is server based.
F. You must always create one regular user when installing the system.
Correct Answer: BDE
Question 7:
You are planning group names for a new system. You decide to use a numbering convention that includes the year and month the project began, to form the group number and name for work associated with that project.
So, for example, a project targeted to begin in January 2013 would have the number (name):
201301(Pr20l301)
What are the two problems with your plan?
A. Group names may not contain a numeric character
B. Group names may be no longer than 7 characters.
C. Group numbers should not be larger than 60000.
D. Group names should be all lowercase.
Correct Answer: CD
C: The Group ID (GID) field contains the group\’s numerical ID. GIDs can be assigned whole numbers between 100 and 60000.
D: Group names contain only lowercase characters and numbers.
Question 8:
You have installed software updates to a new boot environment (BE) and have activated the booting to the new BE, you notice system errors. You want to boot to the last known good configuration. Which option would you use on a SPARC system to boot to the current boot environment?
A. boot -L currentBE
B. boot -Z rpool/ROOT/currentBE
C. boot -a Enter the currentBE dataset name when prompted.
D. boot rpool/ROOT/currentBE
E. boot -m currentBE
F. beadm activate currentBE
Correct Answer: F
You can change an inactive boot environment into an active boot environment. Only one boot environment can be active at a time. The newly activated boot environment becomes the default environment upon reboot.
How to Activate an Existing Boot Environment
1. Use the following command to activate an existing, inactive boot environment:
beam activate beName
beName is a variable for the name of the boot environment to be activated.
Note the following specifications.
beam activate beName activates a boot environment by setting the bootable pool property, boots, to the
value of the ROOT dataset of the boot environment that is being activated.
beam activate sets the newly activated boot environment as the default in the menu.lst file.
2. Reboot.
The newly activated boot environment is now the default on the x86 GRUB menu or SPARC boot menu.
Question 9:
You are troubleshooting network throughput on your server.
To confirm that the load balancing among aggregated links is functioning properly, you want to examine
the traffic statistics on the links comprising the aggregation.
The correct command is ___________.
A. distant – aggr
B. distant show-aggr
C. distant show-link -r
D. distant show-link -aggr
E. distant show-phys -aggr
Correct Answer: B
distant show-aggr [-r | -t] [-I interval] [-p] [ -o field[, …]] [-u R|K|M|G|T|P] [link] Display per-port statistics for an aggregation.
Question 10:
You suspect a problem with the OpenLDAP package and want to make sure that the files have not to be modified or otherwise tampered with.
Which command would validate all of the files contained in the openldap package and report any problems?
A. pkgchk OpenLDAP
B. pkg info OpenLDAP
C. pkg contents OpenLDAP
D. pkg verify openldap
E. pkg set-property signature-policy verify
Correct Answer: A
pkgchk checks the accuracy of installed files or, by using the -l option, displays information about package files. pkgchk checks the integrity of directory structures and files. Discrepancies are written to standard error along with a detailed explanation of the problem.
Question 11:
Which three options describe the purpose of the zonep2vchk command?
A. Used on a Solaris 10 global zone to access the system for problems before migrating that system to a Solaris 10 branded zone.
B. Used to access a Solaris 10 global zone for problems before migrating that zone to a Solaris 11 global zone
C. Used to create zonecfg template for a Solaris 10 global zone that will be migrated to a solaris10 branded zone.
D. Used to migrate an Oracle Solaris 11 global zone to a non-global zone.
E. Used to migrate a Solaris 10 global zone to a non-global zone on the same server; the non-global zone can then be migrated to a Solaris 11 server as a Solaris 10 branded zone.
Correct Answer: CDE
zonep2vchk
-check a global zone\’s configuration for physical to virtual migration into a non-global zone
The zonep2vchk utility is used to evaluate a global zone\’s configuration before the process of physical-to-virtual (p2v) migration into a non-global zone. The p2v process involves archiving a global zone (source) and then installing a non-global zone (target) using that archive Zonep2vchk serves two functions. First, it can be used to report issues on the source which might prevent a successful p2v migration. Second, it can output a template zonecfg, which can be used to assist in configuring the non-global zone target.
Zonep2vchk can be executed on a Solaris 10 or later global zone. To execute on Solaris 10, copy the zonep2vchkutility to the Solaris 10 source global zone. When running on Solaris 10, a target release of S11 can be specified, which will check for p2v into a Solaris 10 Branded zone.
Question 12:
You are going to create live zones on your server. Disk space is critical on this server so you need to reduce the amount of disk space required for these zones. Much of the data required for each of these zones is identical, so you want to eliminate the duplicate copies of data and store only data that is unique to each zone.
Which two options provide a solution for eliminating the duplicate copies of data that is common between all of these zones?
A. Create the zones by using sparse root zones.
B. Set the dedup property to on and the dedupe ratio to at least 1.5 for the pool.Create a separate ZFS file system for each zone in the zpool.
C. Put all of the zones in the same ZFS file system and set the dedupratio property for the ZFS file system to at least 1.5.
D. Put all of the zones in the same ZFS file system and set the dedup property for the file system to on.
E. Put each zone in a separate ZFS file system within the same pool. Set the dedup property to one for each ZFS file system.
Correct Answer: DE
n Oracle Solaris 11, you can use the deduplication (dedupe) property to remove redundant data from your ZFS file systems. If a file system has the dedup property enabled, duplicate data blocks are removed synchronously. The result is that only unique data is stored, and common components are shared between files.
Question 13:
The crash dump notification on your server is:
The documentation states that there should be two core files for each crash dump in the /var/crash directory named vmdump.0
Which command should you choose to display these two files?
A. save core -f vmdump.0
B. dumped uncompressed
C. gunzip vmdump.0
D. dumped -z off
Correct Answer: A
Decompress using savecore -f vmdump.0
savecore – save a crash dump of the operating system
-f dump file Attempt to save a crash dump from the specified file instead of from the system\’s current dump device. This option may be useful if the information stored on the dump device has been copied to an on-disk file by means of the dd(1M) command.
Question 14:
To confirm the IP addresses and netmasks have been correctly configured on the network interfaces, which command(s) should you use?
A. ipadm show-if
B. ipadm show-nic
C. ipadm show-addr
D. ipadm show-addripadm show-mask
E. ipadm show-ipipadm show-mask
F. ipadm show-config
Correct Answer: C
Show address information, either for the given addrobj or all the address objects configured on the specified interface, including the address objects that are only in the persistent configuration.
Example: # ipadm show-and ADDROBJ TYPE STATE ADDR lo0/v4 static ok 127.0.0.1/8
lo0/v6 static ok ::1/128
Question 15:
You have been asked to do an orderly shutdown on a process with a PID of 1234, with the kill command.
Which command is best?
A. kill -2 1234
B. kill -15 1234
C. kill -9 1234
D. kill -1 1234
Correct Answer: B
On POSIX-compliant platforms, SIGTERM is the signal sent to a process to request its termination. The symbolic constant for SIGTERM is defined in the header file signal. h. Symbolic signal names are used because signal numbers can vary across platforms, however, on the vast majority of systems, SIGTERM is signal #15.
SIGTERM is the default signal sent to a process by the kill or kill all commands. It causes the termination of a process, but unlike the SIGKILL signal, it can be caught and interpreted (or ignored) by the process. Therefore, SIGTERM is akin to asking a process to terminate nicely, allowing cleanup and closure of files.
For this reason, on many Unix systems during the shutdown, init issues SIGTERM to all processes that are not essential to powering off, waits a few seconds, and then issues SIGKILL to forcibly terminate any such processes that remain.
leads4pass 1Z0-821 exam dumps are the best 1Z0-821 exam study guide, download the latest 1Z0-821 exam dumps at https://www.leads4pass.com/1z0-821.html (PDF or VCE format) and easily pass Oracle 1Z0-821 exam.
If you are looking online for a reliable and real 1Z0-821 exam study guide, then leads4pass is the place for you.