Avail Updated Lead4Pass 1Z0-822 Exam Dumps With Free Exam Materials | 2021-02
oraclefreedumps 
Are you looking for free 1Z0-822 exam materials? You’ve come to the right place, Lead4Pass 1Z0-822 exam dumps https://www.leads4pass.com/1z0-822.html provides you with updated 1Z0-822 exam materials (PDF or VCE) to help you pass the exam with ease.
Pass the Oracle 1Z0-822 exam the first time using the updated Lead4pass 1Z0-822 exam dumps (140 Q&A) and free 1Z0-822 exam materials.
Free 1Z0-822 Exam Materials Exam Questions Online
If you need to check sample questions of the 1Z0-822 free dumps, go through the Q and As from the 1Z0-822 dumps below.
Question 1:
A recursive snapshot was taken of the root pool and the snapshot streams are stored on a remote system. The boot disk has failed and has been replaced, and the root pool snapshots have been restored. Which two steps are still required to make the system bootable?
A. Re-create the swap and dump devices.
B. Install the boot blocks on the new disk.
C. Restore the snapshot stream.
D. Set the boots property on the root pool.
E. Perform a ZFS rollback to restore the file systems in the root pool.
Correct Answer: CE
Question 2:
Review the following output from the zpool status command:
Which three are true for pool1?
A. If this mirror is split, the new pool will contain disks c3t5d0 and c3t6d0.
B. If this mirror is split, by default the new pool will contain disks c3t3d0 and c3t5d0.
C. Data is striped across mirror-0 and mirror-1.
D. mirror-1 is a mirrored copy of data that is stored on mirror-0.
E. Disk c3t3d0 is a mirrored copy of disk c3c4d0.
F. If this mirror is split, pool 1 will no longer be mirrored.
Correct Answer: BDE
Question 3:
The zfs holds command displays the following information:
Which two statements are true?
A. Use zfs destroy d pool12/data@nov to destroy the snapshot immediately.
B. Attempts to destroy the snapshot using zfs destroy pool12/data@nov will fail.
C. Attempts to destroy the pool12/data@nov snapshot will not destroy the snapshot immediately.
D. The zfs directory R pool12/data command will destroy the file system immediately.
E. The defer_destroy property is set to on for the pool12/data@nov data set.
F. The user refs property is set to 1 (or higher) for the pool12/data@nov data set.
Correct Answer: CE
Question 4:
Consider the following ZFS configuration:
You have created snapshots of the homo directories which are as follows:
You have another storage pool named bpool on the same system. You use the following command to store the snapshots in this pool:
# zfs send rpool/export/[email protected] | zfs recv f [email protected]
What will be created in the pool bpool as a result of this operation?
A. bpool/export/home/ bpool/export/home/curly
B. bpool/export/home/ bpool/export/home/curly bpool/export/[email protected]
C. bpool/export/home/ bpool/export/home/curly [email protected]
D. bpool/curly bpool/[email protected]
E. bpool/curly
F. bpool/curly [email protected]
Correct Answer: A
Question 5:
Consider the following commands on a newly installed system:
zfs set compression=on rpool zfs to get H 0 source compression rpool
What is the output of the second command?
A. default
B.
C. local
D. on
Correct Answer: C
Question 6:
Do you want to create a ZFS file system with the following specifications: lzjb compression enabled? Cannot consume more than 2 GB from the storage pool?? Redundant data at the block level eliminated Mounted as /data?
Which command creates the desired file system?
A. zfs create o mountpoint=/data,compression=on,algorithm=lzjb,deduplication=on,quota=2g /pool1/data
B. zfs create o mountpoint=/data compression=on algorithm=lzjb deduplication=on quota=2g /pool1/data
C. zfs create o mountpoint=/data o compression=on o dedup=on o quota=2g /pool1/data
D. zfs create o mountpoint=/data o compression=on o algorithm=lzjb o deduplication=on o quota=2g / pool1/data
E. zfs create pool/data zfs set mountpoint=/data,quota=2g, dedup=on,compression=on /pool1/data
Correct Answer: C
Question 7:
Which two zpool subcommands will permanently remove a sub mirror from the active storage pool?
A. remove
B. detach
C. destroy
D. offline
E. replace
F. split
G. zpool does not permit this operation on an active storage pool unless the sub mirror faults.
Correct Answer: AB
Question 8:
Your task is to configure storage for an Oracle Solaris 11 system to support multiple web servers. Each web server will be contained in a separate zone. The system has an attached disk array configured as a JBOD (Just a Bunch Of Disks). The system also has an internal solid-state drive.
The data accessed through the websites will be primarily read-only. The web servers are expected to be very busy, so configure the storage for maximum performance. Because the data is primarily static, redundancy is required to maintain high availability in the event of a hardware failure.
Data does not change often, but it is expected that the same data will be accessed many times throughout the day. Which configuration option best meets the data storage requirements?
A. a raid2 storage pool with a separate log device
B. a mirrored storage pool with a separate cache device
C. a mirrored storage pool with a separate log device
D. a three disk striped storage pool with a separate cache device
E. a raidz1 storage pool with a separate log and cache device
Correct Answer: B
Question 9:
The zpool configuration on server A is:
pool 1 c3t2d0 c3t3d0 pool 2 c3t4d0 c3t5d0
The zpool configuration on server B is:
pool1 mirror-0 c3t2d0 c3t3d0 mirror-1 c3t4d0 c3t5d0
Which option will modify the configuration on server A to match server B?
A. zpool destroy pool2 zpool attach pool1 c3t4d0 c3t5d0
B. zpool destroy pool2 zpool attach pool1 c3t2d0 c3t2d0 c3t4d0 c3t5d0
C. zpool destroy pool2 zpool add pool1 c3t4d0 c3t5d0
D. zpool destroy pool2 zpool mirror pool1 pool2
E. zpool destroy pool2 zpool attach pool1 c3t2d0 attach pool1 c3t3d0 zpool attach pool1 c3t4d0 attach pool1 c3t5d0
F. zpool destroy pool1; zpool destroy pool2; zpool create pool1 mirror c 3t2d0 c3t3d0 mirror c4t4d0 c3t5d0
Correct Answer: F
Question 10:
Which is the result of the following command?
# zfs send i dpool/sales/qrreports@qtrreport dpool/sales/qrreports@mth3qtrreport
A. An error message will be sent to standard error.
B. The dpool/sales/qrreports@qtrreport snapshot is saved to disk.
C. The dpool/sales/qrreports@mth3qtrreport snapshot is saved to disk
D. The difference between the First snapshot and the second snapshot will be written to the disk
Correct Answer: A
Question 11:
You have a ZFS pool that contains a hierarchy of data file systems. You create snapshots of the file systems and you created a clone (dpool/export/CID) of the dpool/export/home/CID file systems. The file systems are as follows:
Now you remove a file from the cloned file system: root@sll-server1:~# rm /export/CID/core.bash.8070 How will space usage be changed for dpool/export/CID?
A. The USED value will increase and the REFER value will decrease; the AVAIL value will be unchanged.
B. The USED value will decrease and the REFER value will increase; the AVAIL value will increase.
C. The USED value will decrease, the REFER value will decrease; the AVAIL value will increase.
D. USED, REFER and the AVAIL value will be unchanged.
Correct Answer: C
Question 12:
To reduce the use of storage space on your server, you want to eliminate duplicate copies of data in your server\’s ZFS file systems. How do you specify that pool1/data should not contain duplicate data blocks on write operations?
A. zfs create o compression=on pool1/data
B. zpool create o deduplication=on pool1 ; zfs create pool1/data
C. zpool create o dedupratio=on pool1 ; zfs create pool1/data
D. zfs create o dedupratio=2 pool1/data
E. zfs create o dedup=on pool1/data
Correct Answer: E
Question 13:
Which option lists default checkpoints for building an image using the Distribution Constructor?
A. manifest-valid and ba-init
B. ba-arch and grub-setup
C. transfer-ips-install and pre-pkg-img-mod
D. pkg-img mod and create-USB
Correct Answer: A
Question 14:
Which two statements describe the capabilities of the Distribution Constructor?
A. ISO images for use with the Automated Installer (AI) can be created.
B. Bootable USB images can be created for SPARC and x86 architectures.
C. A single installation service can be used to create an ISO image, for SPARC and x86 architectures.
D. Checkpoints are used to pause the build, thereby allowing the running of a script to modify the resulting ISO image.
E. A single installation service can be used to create ISO images for Solaris 10 and Solaris 11.0 operating systems.
Correct Answer: BE
Question 15:
Your colleague is administering the company\’s Automated Install server and is using a custom manifest. You now plan to replace the default AI manifest with the custom manifest. Which installed subcommand must you use to replace the default AI manifest?
A. update-service
B. update-manifest
C. set-service
D. create-manifest
E. create-service
F. set-manifest
Correct Answer: B
At last
Remember that using the Lead4pass 1Z0-822 exam dumps is your shortcut to easily passing the 1Z0-822 exam, and it’s also important to keep enough practice. Here, get real 1Z0-822 exam dumps. Come on, certificates are waiting for you.
Good luck with the Oracle 1Z0-822 exam.